Verified seller 
Häner HCM250R+B concrete mixing bucket for sale by auction
≈ USD 1,047
Olpe
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
EUR 815
≈ $1,323
≈ USD 948.20
Germany, Olpe
EUR 900
≈ $1,461
≈ USD 1,047
336 kg
Germany, Olpe
EUR 960
≈ $1,559
≈ USD 1,117
Germany, Olpe
EUR 210
≈ $341
≈ USD 244.30
2,000 kg
Net weight
106 kg
Germany, Olpe
EUR 360
≈ $584.50
≈ USD 418.80
Germany, Olpe
EUR 285
≈ $462.70
≈ USD 331.60
Germany, Olpe
EUR 495
≈ $803.70
≈ USD 575.90
280 kg
Germany, Olpe
EUR 1,500
≈ $2,435
≈ USD 1,745
Germany, Olpe
EUR 440
≈ $714.40
≈ USD 511.90
Germany, Olpe
EUR 650
≈ $1,055
≈ USD 756.20
205 kg
Germany, Olpe
EUR 315
≈ $511.40
≈ USD 366.50
Germany, Olpe
EUR 249
≈ $404.30
≈ USD 289.70
Germany, Olpe
EUR 475
≈ $771.20
≈ USD 552.60
Germany, Olpe
EUR 1,300
≈ $2,111
≈ USD 1,512
Germany, Olpe
EUR 6,000
≈ $9,742
≈ USD 6,980
4,000 kg
Germany, Olpe
EUR 360
≈ $584.50
≈ USD 418.80
Germany, Olpe
EUR 2,100
≈ $3,410
≈ USD 2,443
Germany, Olpe
EUR 420
≈ $681.90
≈ USD 488.60
Germany, Olpe
EUR 360
≈ $584.50
≈ USD 418.80
Germany, Olpe
EUR 1,880
≈ $3,052
≈ USD 2,187
Germany, Olpe
Working width: 1140 mm
Height: 890 mm
Depth: 710 mm
Nominal capacity: 250 l
Maximum capacity: 290 l
Curb weight: 505 kg
Concrete weight: 605 kg
Total weight: 1080 kg
Required oil volume: 40-90 l/min
Maximum pressure range: 240 bar
Drive Type Mixing Shaft: Chain
Important safety note: The total weight of the mixing bucket may not exceed 90% of the tipping load (kinked) of the carrier device.
Our HCM250 concrete mixing bucket has the following data and specifications:
– Side panels and base body made of 10mm S355
– Mixer screw rings made of wear-resistant HB500; Thickness 12 mm
– Mixer shaft made of C45 solid steel; Diameter 65 mm
- Cutting edge made of 20mm HB400
– Roller bearings with free-moving rollers
– central hydraulic drain port piston rod protection
– high-quality hydraulic motor
– Solenoid valve with 12V electrical kit for drain opening
– galvanized mesh opening with teeth to tear
open bags
– Interchangeable system for excavators and wheel loaders
– Rubber drain hose with guide rod
– CE certificate with operating and maintenance instructions