New charcoal briquette dryer briquette press machine
≈ EUR 53,500
Zheng Zhou Shi
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+86 159 784...
Show
+86 159 7843 6639
Germany, Egenhofen
Slovakia, Kežmarok
Belgium, Heule (Kortrijk)
Italy, SAN GIOVANNI AL NATISONE (UD)
Poland, Jordanow
Belgium, Heule (Kortrijk)
Belgium, Heule (Kortrijk)
Belgium, Heule (Kortrijk)
Belgium, Heule (Kortrijk)
Austria, 1010 Wien
Ukraine, m. Cherkasi
Slovakia, Kežmarok
Croatia, Jezerane
Netherlands, Wijchen
Austria, Vienna
Netherlands, Rotterdam
Model: FB-Three axis 14.7M
Chain sheet width: 2250mm
Chain sheet height: 40mm
Chain sheet small wheel diameter: Φ55mm
Chain sheet total length: 88m
Effective drying length: 72m
Scraper plate length: 14.7m
Chain sheet pin: Φ20mm
Chain sheet rolling wheel diameter: 60mm
Chain sheet pitch: 310mm
Bearing shaft: 3 sets UCT316 (machine head use)
3 sets UCT316 (machine end use)
Motor power: 7.5kw*3 sets
Adjustable speed range: 1250-125r/min
Drying time: 120min-180min
Inside temperature: 180-230℃
Advantages of Charcoal Briquette Dryer
Currently, the market offers various drying equipment such as chain tape dryers, mesh belt dryers, and vertical dryers. We manufacture all of these, but in terms of drying effect and service life, chain tape dryers are superior.
1. High Drying Efficiency of Charcoal Briquette Dryer
The reason they are called chain tape dryers is because the chain tape moving within the dryer automatically flip over at the head or tail of the machine, meaning they travel back and forth twice on the same layer. Mesh belt dryers, on the other hand, only travel once. For a four-layer dryer, the chain tape dryer's plates travel eight times within the dryer, while the mesh belt dryer's belt only travels four times. Therefore, the chain tape dryer has a higher drying efficiency than the mesh belt dryer.
2. Smaller Footprint for Charcoal Briquette Dryer
Because of their high drying efficiency and large drying area, tilting plate dryers are shorter than mesh belt dryers for the same output, saving workshop space.
3. Low breakage rate of the chain tape dryers: Our company's chain tape dryer uses small tilting plates. The vertical drop of each tilting plate is only 200mm, and the tilting occurs along a track, allowing the material inside to slowly fall to the next layer with virtually no breakage.
The drop height of a mesh belt dryer is 400mm, and it's a drop-off process, which can cause some breakage.
The vertical dryer is 7.5m high. Initially, the material entering the dryer causes significant breakage; almost all material breaks. Breakage decreases only when the drum is full, but the large volume and weight of material inside the drum, combined with friction, can still cause breakage.
4. Smooth operation and no plate sinking: The chain tape operate within a track inside the dryer, with rollers on the plates ensuring smooth operation. The plates are made from a single piece of stamped steel, allowing them to withstand high pressure, ensuring the material lies flat on them without deformation or sinking.
When the conveyor belt is running, the material spread on it tends to concentrate in the middle of the belt, forming a net-like shape. This causes the belt to sink, leading to friction between the belt and the rollers below, eventually causing the belt to break.
5. Automatic Cleaning of Loose Material in the Charcoal Briquette Dryer
The Charcoal Briquette Dryer is equipped with an automatic cleaning device for loose material, eliminating the need for manual cleaning as required by conveyor belt dryers.