New NKO Machines UZ18 chamfering machine
Niederlangen6596 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 5939 9...
Show
+49 5939 940640
+49 5939 9...
Show
+49 5939 940650
Germany 
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Eislingen
Germany, Eislingen
Germany, Eislingen
Germany, Eislingen
Germany, Eislingen
Germany, Eislingen
workpiece length -- mm
work piece width 18 mm
range of angles 15° - 50° °
weight of the machine ca. 110 kg
diameter -- mm
workpiece length -- mm
work piece width 18 mm
range of angles 15° - 50° °
weight of the machine ca. 110 kg
diameter -- mm
workpiece length -- mm
work piece width 18 mm
range of angles 15° - 50° °
weight of the machine ca. 110 kg
diameter -- mm
workpiece length -- mm
work piece width 18 mm
range of angles 15° - 50° °
Chamfering system UZ18 HARDWORKER
Maximum bevel width 18 mm with automatic feed
The UZ18 Hardworker machine is one of the most powerful automatic feed beveling
machines on the market. It is not only suitable for workshops, but also for on-
site assembly. The machine has a stepless working angle adjustment system.
Thanks to the special design of the drive system, the UZ18 Hardworker is also
suitable for harder materials. The machine is equipped with the automatic feed.
Working with UZ18 Hardworker is therefore very convenient.
*For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and
aluminum materials
* For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm
* Application range of sheet thickness 6 - 40 mm
* The bevel angle can be easily adjusted continuously from 15 to 50 without
replacing any part
* Double-sided bevel (X, K) with no material handling
* Easy connection to 3D manipulator for easier operation and handling
* Silent working
* Equipped with automatic feeder
* Stationary or mobile use
* The machine works with large workpieces without any support at a speed of 1.9
m/min
* Smaller workpieces are placed directly in the machine
- Max. bevel width (hypotenuse): 18 mm
- Infinitely adjustable angle: 15 - 50
- Area of application sheet thickness: 6 - 40 mm
- Motor: 750W
- Feed speed: 1.9 m/min
- Weight: 110kg
- Dimension: 438 x 719 x 644 mm
** We are happy to offer you an optional 3D manipulator (mobile) for this
device on **
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Werkstücklänge -- mm
Werkstückbreite 18 mm
Winkelbereich 15° - 50° °
Maschinengewicht ca. 110 kg
Durchmesser -- mm
Werkstücklänge -- mm
Werkstückbreite 18 mm
Winkelbereich 15° - 50° °
Maschinengewicht ca. 110 kg
Durchmesser -- mm
Werkstücklänge -- mm
Werkstückbreite 18 mm
Winkelbereich 15° - 50° °
Maschinengewicht ca. 110 kg
Durchmesser -- mm
Werkstücklänge -- mm
Werkstückbreite 18 mm
Winkelbereich 15° - 50° °
Anfassystem UZ18 HARDWORKER
Maximale Fasenbreite 18 mm mit automatischem Vorschub
Die Maschine UZ18 Hardworker ist eine der leistungsstärksten Anfasmaschinen mit
automatischem Vorschub auf dem Markt. Sie eignet sich nicht nur für
Werkstätten, sondern auch für eine Montage vor Ort. Die Maschine verfügt über
ein stufenloses Arbeitswinkel-Einstellsystem. Dank der speziellen Konstruktion
des Antriebssystems ist der UZ18 Hardworker auch für härtere Materialien
geeignet. Die Maschine ist mit dem automatischen Vorschub ausgestattet. Die
Arbeit mit UZ18 Hardworker ist daher sehr komfortabel.
*Für konventionellen Stahl (bis zu einer Festigkeit von 600 MPA/87022 PSI),
Messing, Kupfer und Aluminiummaterialien
* Zum Anfasen von Werkstücken mit den Mindestmassen von 70 x 150 x 6 mm
* Einsatzbereich der Blechstärke 6 – 40 mm
* Der Fasenwinkel lässt sich leicht von 15 bis 50 stufenlos einstellen, ohne
dass ein Teil ausgetauscht werden muss
* Doppelseitige Fase (X, K) ohne Materialhandhabung
* Einfacher Anschluss an den 3D-Manipulator für einfachere Bedienung und
Handhabung
* Geräuschloses Arbeiten
* Ausgestattet mit automatischem Einzug
* Stationärer oder mobiler Einsatz
* Die Maschine arbeitet mit grossen Werkstücken ohne jede Unterstützung mit
einer Geschwindigkeit vom 1,9 m/min
* Kleinere Werkstücke werden direkt in die Maschine eingelegt
- Max. Fasenbreite (Hypotenuse): 18 mm
- Stufenlos einstellbarer Winkel: 15 - 50
- Einsatzbereich Blechstärke: 6 – 40 mm
- Motor: 750 W
- Vorschubgeschwindigkeit: 1,9 m/min
- Gewicht: 110 kg
- Abmessung: 438 x 719 x 644 mm
** Gerne bieten wir Ihnen Optional einen 3D-Manipulator (mobil) für dieses
Gerät an **