Jones & Shipman Ultramat-X cylindrical grinding machine
SAINT-GENIX-LES-VILLAGES
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+33 4 86 11...
Show
+33 4 86 11 77 77
Switzerland, Niederhelfenschwil
TECHNICAL CHARACTERISTICS:
Centre distance : 650 [mm]
Height of centers : 160 [mm]
Max. grinding diameter : 300 [mm]
Max. grinding lenght : 650 [mm]
Stroke X axis : 260 [mm]
Max. Stroke speed X axis : 6000 [mm/min]
Resolution X axis : 0.0001 [mm]
Stroke Z axis : 750 [mm]
Max. Stroke speed Z axis : 12000 [mm/min]
Resolution Z axis : 0.0001 [mm]
Grinding wheel max. speed : 2672 [rpm]
Grinding spindle motor power : 4 [kW]
B axis swivelling stroke : -190 / +45 [°]
B axis indexing precision : 0.001 [°]
Internal workpiece spindle nose : MT5
Workpiece spindle max. speed : 660 [rpm]
Max. part weight in part holder headstock between centres : 100 [Kg]
Workpiece swiveling range : +90 / -15 [°]
Type of attachment tailstock : MT3
Tailstock quill stroke : 30 [mm]
Touch control panel : FANUC QuickPanel G E
Supply voltage : 400 [V]
Weight : 5000 [Kg]
EQUIPMENT INCLUDED:
x1 manual indexing B axis
x1 HEIDENHAIN digital read out (B axis indexing resolution 0.001°)
x1 internal grinding spindle
x1 paper filtration + coolant tank
The information on this page has been obtained by the best of our ability. Therefore, its accuracy cannot be guaranteed
CARACTÉRISTIQUES TECHNIQUES :
Distance entre-pointes : 650 [mm]
Hauteur de pointes : 160 [mm]
Diamètre maxi. de rectification : 300 [mm]
Longueur maxi. de rectification : 650 [mm]
Course axe X : 260 [mm]
Vitesse maxi. course axe X : 6000 [mm/min]
Résolution axe X : 0.0001 [mm]
Course axe Z : 750 [mm]
Vitesse maxi. course axe Z : 12000 [mm/min]
Résolution axe Z : 0.0001 [mm]
Vitesse broche porte-meule maxi. : 2672 [tr/min]
Puissance broche porte-meule : 4 [kW]
Course angulaire axe B : -190 / +45 [°]
Précision d'indexation axe B : 0.001 [°]
Cône intérieur broche porte-pièce : MT5
Vitesse maxi. broche porte-pièce : 660 [tr/min]
Poids maxi. admissible poupée porte-pièce entre-pointes : 100 [Kg]
Angle de rotation poupée porte-pièce : +90 / -15 [°]
Cône contre-poupée : MT3
Course fourreau contre-poupée : 30 [mm]
Pupitre de commande tactile : FANUC QuickPanel G E
Tension d'alimentation : 400 [V]
Poids : 5000 [Kg]
EQUIPEMENTS INCLUS:
x1 axe B manuel
x1 visualisation de cotes HEIDENHAIN (indexation axe B résolution 0.001°)
x1 broche inter. mécanique
x1 filtration papier + bac d'arrosage
Descriptif technique à titre indicatif, sans engagement de notre part