Felder FORMAT 4 Tempora60.06LX edgebander
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Germany, Pullach
Germany, Pullach
Control system: x-motion PLUS
Chain feedFeed speed: 10 m/minDrive motor: 0.75 kW (S6) – 1.1 kW (S6)Minimum workpiece length: 140 mmMinimum workpiece width: 70 mmNote: Minimum width varies depending on workpiece length, height, and surface finish.
Feed speed: 10 m/min
Drive motor: 0.75 kW (S6) – 1.1 kW (S6)
Minimum workpiece length: 140 mm
Minimum workpiece width: 70 mm
Note: Minimum width varies depending on workpiece length, height, and surface finish.
Turntable edge magazine (rolled edge material)Turntable diameter: 750 mmEdge thickness: 0.4 – 3 mm
Turntable diameter: 750 mm
Edge thickness: 0.4 – 3 mm
Extendable frameWorkpiece support extendable up to 450 mm
Workpiece support extendable up to 450 mm
Upper pressure barManually adjustable workpiece height: 8 – 60 mm
Manually adjustable workpiece height: 8 – 60 mm
Edge feedFor rolls and rigid material
For rolls and rigid material
Joining unitPower: 2.2 kW (2 × 1.1 kW)Diamond cutter Z2Speed: 12,000 rpm
Power: 2.2 kW (2 × 1.1 kW)
Diamond cutter Z2
Speed: 12,000 rpm
Gluing unitTeflon-coated for 1.5 kg EVA or PUR granulateReady after approx. 10 min heating timeTool-free quick-change system
Teflon-coated for 1.5 kg EVA or PUR granulate
Ready after approx. 10 min heating time
Tool-free quick-change system
Pressure unitPneumatically controlled1 driven and 2 conical pressure rollers
Pneumatically controlled
1 driven and 2 conical pressure rollers
ShearFor roll edge material thickness: 0.4 – 3 mm
For roll edge material thickness: 0.4 – 3 mm
Cutting unitTwo high-frequency motors, each 0.35 kW, 12,000 rpmPneumatically swiveling 0° – 10°
Two high-frequency motors, each 0.35 kW, 12,000 rpm
Pneumatically swiveling 0° – 10°
Multifunctional milling unit (x-motion PLUS)Flush and radius millingOne HF motor top and bottom, each 0.75 kW, 12,000 rpmEach with 4 interchangeable blades
Flush and radius milling
One HF motor top and bottom, each 0.75 kW, 12,000 rpm
Each with 4 interchangeable blades
Corner processing unitFor soft and postforming workpiecesFront edge processingEdge thickness: 0.4 – 3.0 mmWorkpiece height: 10 – 60 mm
For soft and postforming workpieces
Front edge processing
Edge thickness: 0.4 – 3.0 mm
Workpiece height: 10 – 60 mm
Radius scraper unit2-axis motor-driven, position-controlledPneumatic release function
2-axis motor-driven, position-controlled
Pneumatic release function
Polishing unitTop and bottom
Top and bottom
application type: Edge Banding
Location: Germany
machine type: Edgebander