KUKA KP2 HV 2600 HW industrial robot
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
EUR 1,000
≈ $1,772
≈ USD 1,161
Germany, Hamburg
Germany, Nürtingen
Germany, Nürtingen
Germany, Langen
Spain, Barcelona
Germany, Grenzach-Wyhlen
Germany, Buchen
Germany, Wentorf (Hamburg)
Germany, Grossenaspe
Germany, Grossenaspe
Germany, Grenzach-Wyhlen
Germany, Bünde
EUR 600
≈ $1,063
≈ USD 696.80
Germany, Hamburg
Auction
Germany, Dormagen
Romania, Oradea
Germany, Grossenaspe
Germany, Grossenaspe
Germany, Grossenaspe
Germany, Grossenaspe
Industrial robot parts
Additional equipment
Component holder (cradle) between the rotary tilting table and the counter bearing. L = 4250mm x 1000mm. 16mm holes as provided.
Connection to the faceplates with standard Bräuer drilling pattern (installation height is still to be adjusted to ensure the largest possible turning radius).
The component holder is designed for quick change. (Brauer Standard)
Machine Benefits
Technical Machine Benefits
Turn-tilt module (max load 2600 kg)
Mount position (assembly) track: kl4000
Hofmann blauf. Rotary module with counter bearing
Rotary/tilting module kp2-hv 2600 hw with counter bearing for robot system // rotary-tilting module kp2-hv 2600 hw, freely programmable, maximum load 2,600 kg, maximum torque 3,900 nm, maximum tilting moment 9,250 nm, maximum rotation axis speed 50°/s, maximum tilt axis speed 25°/s
Turning diameter = 1,200 mm
Krc4 standard control cabinet
Design services for fixtures, grippers, positioners, or customized accessories
Closed cable ducts for installation within the system on the floor/base plate or as open cable trays for installation above the protective fence
Cda layout plan
Extra Information
The machine is completely new and unpacked
It was build by the system integrator, but never delivered.
Counter bearing for rotary-tilting module KP2
Counter bearing for rotary-tilting module KP2 11/26. This allows the KP2 to also be used as a tailstock turning device.
The counter bearing is bolted to the base (Demmler) and can be adjusted on the Demmler plate in 100mm increments. Diameter = 28mm. Turning diameter = 1200mm.
Workspace survey
-Connection plan
-Project schedules
-Assembly plans
Conversion and configuration
Conversion and configuration of the system from a 3D CAD model to a simulation model for Cenit.
Electrical and pneumatic interconnection
application type: Welding
Location: Germany
machine type: Welding Robot
control unit brand: KUKA
Control Brand: KUKA
Control Model: KRC4
Number of Axes: 6