Heiche HEIS02 Powder coating line metal powder coating machine
Leipzig
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 89 380...
+49 89 38031644
Germany, Location:stuttgart
Germany, Location:wuppertal
Germany, Location:frankfurt
Germany, Gräfelfing
Germany, Gräfelfing
Germany, Dabergotz
Germany, Grenzach-Wyhlen
Germany, Wiefelstede
Turkey, İSTANBUL/PENDİK
Turkey, İSTANBUL/PENDİK
Turkey, İSTANBUL/PENDİK
Turkey, İSTANBUL/PENDİK
Turkey, İSTANBUL/PENDİK
Turkey, İSTANBUL/PENDİK
Turkey, Kocaeli / İzmit
Turkey, Kocaeli / İzmit
Turkey, Kocaeli / İzmit
Marke: Heiche
Manufacturer
Heiche
Model
HEIS02
Machine type
Powder coating line
Year of manufacture
1999 / 2013 (conversion)
Status
Operational / Ready for use
Technical Specifications
Overall dimensions (L x W x H): approx. 24 m x 15 m x 5 m
Maximum workpiece window: 1,150 x 880 x 350 mm
Maximum load per metre: 60 kg on 2 brackets
Compatible materials: Steel
aluminium
stainless steel
zinc die-cast
Coating thickness: 40 - 200 microns
Conveyor speed / throughput: 0.3 - 3.0 m/min
Noise level: less than 85 dB(A)
Control system: Siemens S7-1500
Operating software: ICOM (upgraded 2024)
Operating modes: Manual and automatic
Conveyor system: Chain conveyor
Number of pre-treatment baths: 8
Automatic powder coating booth: 1
Manual powder coating booth: 1
Drying: Adhesive water dryer + curing oven
Loading / unloading: Manual along the chain conveyor
Utilities and Connections
Electrical supply: 3-phase 230/400 V
Control voltage: 24 V DC
Total electrical power: 80 kW
Fuse - automatic powder line: 125 A
Fuse - pre-treatment + ring conveyor: 63 A
Compressed air operating pressure: 7.5 bar
Mains water consumption: 100 l/h
Demineralised water (VE) pressure: 2.5 bar
consumption 600 l/h
Hot water (PWW): 1.5 bar
flow temperature 85 degrees C
capacity 30 kW
Gas connection capacity: 490 kW
Exhaust air: Return via exhaust fan flange (pressure side)
Powder feed: Dosing system from a hopper
Waste water: Returned via ball valve
Pre-treatment Bath Register (8 Baths)
Bath 1: Spray depassivation / neutral pickling / iron phosphating - 2.5 m3 - Stainless V4A
Gas burner with heat exchanger
Bath 2: Spray rinse (mains water) - 1.0 m3 - Stainless V4A
Bath 3: VE spray rinse I - 1.0 m3 - Stainless V4A
Bath 4: VE spray rinse II - 0.7 m3 - Stainless V4A
Bath 5: Titan spray passivation - 0.7 m3 - Stainless V4A - Hot water heating
Bath 6: CR(III) spray passivation - 0.96 m3 - Plastic - Hot water heating
Bath 7: VE spray rinse - 0.5 m3 - Plastic
Bath 8: VE spray rinse - 0.5 m3 - Plastic
Drying and Curing Ovens
Adhesive water dryer - Manufacturer: Hugo Brennstuhl
Model: Haftwassertrockner - Year: 1999
Max. drying temperature: 190 degrees C
Thermal output: 154 kW
Heating medium: Natural gas
Curing oven - Manufacturer: Hugo Brennstuhl GmbH & Co. KG
Model: Einbrennofen - Year: 1999
Max. curing temperature: 240 degrees C
Thermal output: 160 kW
Heating medium: Natural gas
Automatic Powder Coating Booth
Manufacturer: J. Wagner
Model: PrimaCube Powder Kabine 12000 with 1 manual operator platform
Powder recovery: Mono-cyclone / filter 12000
Conveying: Plug conveyor with control
Pipework: Booth to cyclone and cyclone to after-filter return
Control: Booth control panel (without application system)
Extras: Additional roof for manual operator including lighting
comfort powder centre with
fresh powder supply
Automatic spray guns: 13
Manual spray guns: 1
Manual Powder Coating Booth
Manufacturer: J. Wagner
Model: Handkabine Basic 4000 + SPRINT Airfluid XE unit for carton powder coating
Input power: 3.0 kW
Scope of Supply
Chain conveyor with 498 hooks
8 pre-treatment baths (as listed above)
Adhesive water dryer
Curing oven
1 automatic powder coating booth (Wagner PrimaCube 12000)
1 manual powder coating booth (Wagner Basic 4000
Find more here
show contacts
Contact us at
show contacts