Voortman V320 plasma cutting machine
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Germany, Berlin
Germany, Nürtingen
Germany, Niederlangen
Germany, Nürtingen
Germany, Nürtingen
Germany, Pullach
Germany, Pullach
Workpiece sizeMin./max. panel length: 850 – 6,100 mmMin./max. panel width: 200 – 2,050 mmMin./max. panel thickness: 6 – 75 mm
Min./max. panel length: 850 – 6,100 mm
Min./max. panel width: 200 – 2,050 mm
Min./max. panel thickness: 6 – 75 mm
Drilling unit: VD40Mounting: SK 40Axis speed: 0 – 2,500 rpm (continuously variable, servo motor)Drill diameter: 5 – 40 mmThreading: M6 – M30Countersinking: YesPunch marking option: YesLayout marking option (optional): YesAutomatic tool changer: 2 x VTC 5/40 (2 x 5 positions)Lubrication/cooling: Internal cooling, air/oilHydraulic mounting: YesRated load: 30 kW
Mounting: SK 40
Axis speed: 0 – 2,500 rpm (continuously variable, servo motor)
Drill diameter: 5 – 40 mm
Threading: M6 – M30
Countersinking: Yes
Punch marking option: Yes
Layout marking option (optional): Yes
Automatic tool changer: 2 x VTC 5/40 (2 x 5 positions)
Lubrication/cooling: Internal cooling, air/oil
Hydraulic mounting: Yes
Rated load: 30 kW
Feeding and positioning: Synchronously driven servo motors, servo converter
Cutting – Plasma (Smart Focus 300)Min./max. thickness: 3 – 80 mmMax. piercing capacity: 40 mmVirtually slag-free cutting: up to 35 mmMarking: Yes, with the same consumablesGases:Plasma gas for cutting mild steel: O2 (99.9% pure, clean, dry, oil-free)Shielding gas for mild steel: O2 / Air (99.9% pure, clean, dry, oil-free)Marking gas: Argon; for >200 A, nitrogenAutomatic gas console: YesAutomatic height adjustment: YesIgnition: AutomaticCutting speed (mild steel):6 mm: approx. 3,700 mm/min @ 90 A12 mm: approx. 3,600 mm/min @ 200 A25 mm: approx. 1,600 mm/min @ 300 A40 mm: approx. 720 mm/min @ 300 A50 mm: approx. 400 mm/min @ 300 A80 mm: approx. 100 mm/min @ 300 A
Min./max. thickness: 3 – 80 mm
Max. piercing capacity: 40 mm
Virtually slag-free cutting: up to 35 mm
Marking: Yes, with the same consumables
Gases:Plasma gas for cutting mild steel: O2 (99.9% pure, clean, dry, oil-free)Shielding gas for mild steel: O2 / Air (99.9% pure, clean, dry, oil-free)Marking gas: Argon; for >200 A, nitrogen
Plasma gas for cutting mild steel: O2 (99.9% pure, clean, dry, oil-free)
Shielding gas for mild steel: O2 / Air (99.9% pure, clean, dry, oil-free)
Marking gas: Argon; for >200 A, nitrogen
Automatic gas console: Yes
Automatic height adjustment: Yes
Ignition: Automatic
Cutting speed (mild steel):6 mm: approx. 3,700 mm/min @ 90 A12 mm: approx. 3,600 mm/min @ 200 A25 mm: approx. 1,600 mm/min @ 300 A40 mm: approx. 720 mm/min @ 300 A50 mm: approx. 400 mm/min @ 300 A80 mm: approx. 100 mm/min @ 300 A
6 mm: approx. 3,700 mm/min @ 90 A
12 mm: approx. 3,600 mm/min @ 200 A
25 mm: approx. 1,600 mm/min @ 300 A
40 mm: approx. 720 mm/min @ 300 A
50 mm: approx. 400 mm/min @ 300 A
80 mm: approx. 100 mm/min @ 300 A
Cutting – Oxy-fuel (oxygen cutting unit)Nozzle type: Nozzle-mixAutomatic height adjustment: YesGas supply: Magnetic valve with non-return valveFuel gas: Propane (optional: Acetylene)Cutting gas: O2Max. thickness: 75 mm
Nozzle type: Nozzle-mix
Automatic height adjustment: Yes
Gas supply: Magnetic valve with non-return valve
Fuel gas: Propane (optional: Acetylene)
Cutting gas: O2
Max. thickness: 75 mm
General/installationWorking direction: Left to rightWorking height: 760 mm (+/- 25 mm)Ambient temperature: -10°C to +35°C, max. 95% relative humidityVoltage regulator: Not includedCurrent transformer: Not included
Working direction: Left to right
Working height: 760 mm (+/- 25 mm)
Ambient temperature: -10°C to +35°C, max. 95% relative humidity
Voltage regulator: Not included
Current transformer: Not included
Additional equipment
Kjellberg Smart Focus 300 plasma source (included)
Donaldson DFPR06 extraction system (included; last filter change January 2025)
application type: Cutting
Location: Germany
machine type: Plasma Cutting Machine
Table Load: 7500 kg