IDAG Druckregler ZM-B25H-FD-P100180/Vs pneumatic valve for industrial equipment
≈ A$2,136
Grenzach-Wyhlen8007 km to "United States"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 7624 98...
Show
+49 7624 9889756
+49 170 81...
Show
+49 170 8106758
Germany 
Germany, Grenzach-Wyhlen
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
designation: overflow valve
outlet pressure: Atmospheric (atm.)
The IDAG overflow valve type ZM-B25H-FD-P100180/Vs is a valve for automatic pressure relief specially developed for low-pressure applications. With an inlet pressure range of 15 to 100 mbar and an atmospheric outlet, it is ideal for applications with very low operating pressures, such as in the pharmaceutical, food, or gas industries.
The system consists of the parts shown in the pictures.
Advantages:
- Very precise pressure control in the low pressure range
- Robust and hygienic stainless steel design
- Can be installed horizontally – ideal for compact system layouts
- Flange connection DN25 according to EN1092-1
- Low maintenance, high operational reliability
---------------------------------------------------------------
3. General functions
- Pressure relief at low pre-pressure (15–100 mbar)
- Automatic opening when the set pressure is exceeded
- Valve outlet pressureless (into the atmosphere)
- Ideal for sensitive processes where pressure peaks must be avoided
- Suitable for gas or compressed air systems
---------------------------------------------------------------
4. CO₂ savings
By reselling this valve, new production is no longer necessary. This saves approximately 200–300 kg CO₂ – comparable to the emissions of a small car on a distance of around 1,500 km.
Manufacturer: IDAG pressure regulator
Model/Type: ZM-B25H-FD-P100180/Vs
Serial number: B3 1055 / Kv value: 6.50
Designation: Overflow valve
Inlet pressure: 15 – 100 mbar (horizontal installation)
Outlet pressure: Atmospheric (atm.)
Design: Stainless steel with flange connections (DN25, PN16)
Condition: Used, good condition with slight traces of color (red marking)
Origin: Switzerland (presumably via Zimmerli Messtechnik AG)
Bezeichnung: Überströmventil
Austrittsdruck: Atmosphärisch (atm.)
Das IDAG Überströmventil Typ ZM-B25H-FD-P100180/Vs ist ein speziell für Niederdruckanwendungen entwickeltes Ventil zur automatischen Druckentlastung. Mit einem Eingangsdruckbereich von 15 bis 100 mbar und atmosphärischem Austritt eignet es sich ideal für Anwendungen mit sehr niedrigen Betriebsdrücken, z. B. in der Pharma-, Lebensmittel- oder Gastechnik.
Die Anlage besteht aus den Teilen, die in den Bildern zu sehen ist.
Vorteile:
- Sehr präzise Druckregelung im Niederdruckbereich
- Robuste und hygienische Edelstahlausführung
- Horizontal einbaubar – ideal für kompakte Anlagenlayouts
- Flanschverbindung DN25 nach EN1092-1
- Geringer Wartungsaufwand, hohe Betriebssicherheit
---------------------------------------------------------------
3. Allgemeine Funktionen
- Druckentlastung bei niedrigem Vordruck (15–100 mbar)
- Automatische Öffnung bei Überschreiten des eingestellten Drucks
- Ventilausgang drucklos (in die Atmosphäre)
- Ideal für sensible Prozesse, bei denen Druckspitzen vermieden werden müssen
- Geeignet für Gas- oder Druckluftsysteme
---------------------------------------------------------------
4. CO₂-Einsparung
Durch den Wiederverkauf dieses Ventils kann auf eine Neuproduktion verzichtet werden. Das spart ca. 200–300 kg CO₂ ein – vergleichbar mit dem Ausstoß eines Kleinwagens auf etwa 1.500 km Fahrstrecke.
Hersteller: IDAG Druckregler
Modell/Typ: ZM-B25H-FD-P100180/Vs
Seriennummer: B3 1055 / Kv-Wert: 6.50
Bezeichnung: Überströmventil
Eintrittsdruck: 15 – 100 mbar (Horizontalmontage)
Austrittsdruck: Atmosphärisch (atm.)
Bauform: Edelstahl mit Flanschanschlüssen (DN25, PN16)
Zustand: Gebraucht, guter Zustand mit leichten Farbspuren (rote Markierung)
Herkunft: Schweiz (vermutlich über Zimmerli Messtechnik AG)