Amada HG 1003 ATC ARs press brake
Ludwigsburg
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 7141 48...
Show
+49 7141 4882799
+49 176 246...
Show
+49 176 24697022
Germany 
Germany, Ludwigsburg
Germany, Ludwigsburg
Germany, Ludwigsburg
Germany, Niederlangen
Germany, Niederlangen
Germany, Niederlangen
Germany, Nürtingen
Germany, Kaiserslautern
Germany, Niederlangen
Germany, Bonn
Germany, Niederlangen
Germany, Niederlangen
Year 03/2021
Machine hours: about 16.000h
Description
The HG-ARs bending cell was developed to guarantee maximum productivity, flexibility, and precision for both small-batch production and parts of varying sizes. The main components of the HG-ARs are the hybrid press brake with automatic tool changer, the specially developed and highly flexible robot, and the automatic gripper changer unit.
Thanks to the integrated ATC (Automatic Tool Changer) unit, the hybrid press brake with ATC can execute even the most complex tool layouts within minutes. The special and highly flexible AMADA robot, mounted on a linear axis with configurable length, can handle parts quickly and flexibly, offering extremely competitive cycle times. The automatic gripper changer unit (AGC) can accommodate up to nine different grippers, available in various designs and sizes, thus enabling optimal handling of all types of parts. The various solutions for depositing finished parts minimize production cycle interruptions.
Press brake Amada HG 1003
Maximum press force 1000 kN
Minimum adjustable press force 40 kN
Length of press force 3110 mm
Distance between the frames 2700 mm
Throat depth 450 mm
Stroke 250 mm
Opening height 596 mm
Table height 984 mm
Approach speed 1-200 mm/s
Working speed 1-20 mm/s
Return speed 1-250 mm/s
- Hydraulic tool clamping AMTSIII S
- Backgauge finger with tactiler sensors (potentiometer)
- 6 -Axis backgauge with Delta-X function for both fingers
- TDS Thickness detection – Sensors in press beam drive for monitoring of sheet thickness
- System for die cleaning
- DIGIPRO-IR wireless angle measurement device with infrared for connection to control
- Barcode reader in control
- Active angle measurement system BI-S with a pair of sensors, movable by motor
- X-Gauge – side gauge with potentiometer for capturing of lateral position of the workpiece
Amada ATC Tool Changer
The AutoToolChanger uses four manipulators to automatically transport the tools required for the current program, providing direct access to a wide selection of tools. The manipulators position the tools with high precision on the press beam. In combination with the ATC, the hydraulic clamping system ensures secure tool retention.
15 magazines for punches
18 magazines for dies
Tool length: 800 mm each
Amada-AMTS IIIS system for punches and dies
Safety door
Loading and unloading robot HD20P
Max. Capacity (incl. gripper) 20 kg
Number of controlled axis 6
Dimension of workpiece min./max. 150x150 / 1000x800 mm
Material thickness 0,5 bis 6mm
- 6-axis robot including separate controller and teach pendant.
- AGC automatic gripper changer with a capacity for up to 9 grippers.
- Floor track for the robot, travel range 8.8 m.
- 1 combination gripper
- 1st loading position including 2 expanding magnets, side stop, and double sheet control.
- Second loading position, including expanding magnets and side stop.
- Re-gripping device for parts up to 1000 x 800 mm.
- Interface for conveyor belt on the unloading side.
- Device for vertical loading of blanks with forming operations.
- Conveyor belt for unloading finished parts.
Security enclosure with electronically locked doors for the cell with a vertically arranged conveyor belt.
Dimensions:
Length 13700 mm
Width 6500 mm
Height 3002 mm