New Geroldinger System for dosing of sodium butyl xanthogenate production line
≈ $304,700
Bad Berleburg6766 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+359 5...
Show
+359 590733
+359 89 875...
Show
+359 89 875 0103
Germany 
1 Chain conveyor type w250 x 38.000
Inside width of tube: 250 mm
Length of tube: 38 m
Inlet: 1 piece, no bulk pressure on the inlet
Material:
Stainless steel 1.4301 or similar in touch with product, other parts made of mild steel
This unit is driven by advance 3 kW attachable gear motor.
1 Bucket elevator type w360/190
Height: approx. 23,5 m
Bucket width: 140 mm
Material:
Stainless steel 1.4301 or similar in touch with product, other parts made of mild steel
This unit is driven by an attachable gear motor (SEW)
advance 4 kW
1 Distribution Screw Conveyor
S 250 x 5000 mm
Material:
Stainless steel 1.4301 or similar in touch with product, other parts made of mild steel
End bearing is offset; rotary shaft seal, grease box and compressed air flushing included. Air connections are joined by pipework, including magnetic valve for compressed air flushing.
1 inflow element, ~140 mm in length
2 outflow element with cleaning lid
1 drive advance 1,1 kW SEW, PTC thermistor sensor
This unit is driven by an attachable gear motor.
Accessories:
2 Slide valve
DN 250
stainless steel
pneumatically operated
1 Multigon cellular- block
Number of cells: 2
Dimension between axes: 3,5 x 3,5 m
Height above hopper: 11,8 m
Usable capacity: each ~150 m3
Materials and surfaces:
Cover sheets of the wall elements touched by product are made of stainless steel 1.4541.
All other surfaces touched by product are made of stainless steel 1.4301.
Cover sheets of the wall elements not touched by product are made of mild steel hot dip galvanized.
All other surfaces of the silo not touched by product are made of mild steel S235JR
2 Set of cell covers
for the above cells
Material:
In touch with product stainless steel 1.4301
Accessories each cell cover:
2 Flange for rupture disk
1 Manhole DN 600 on roof, with security grid
1 Nozzle for filling
1 Sleeve for max level indication
1 Sleeve for max level indication
1 Nozzle for continuous level-indication
1 Security valve +45/-5 mbar, +-10% made of AlMg3
2 Hopper
For installation under a multigon silo cell
Inlet: 3,5 x 3,5 m (cell dimension between axes)
Outlet: 2,08 x 2,08 m
Angle: 75 °
Material:
In touch with product stainless steel 1.4301
Accessories for all 2 cells:
1 flange for filter
1 Pressure compensation pipe
1 Cable duct vertical screwed on silo
1 Caged access ladder with resting platform, AlMg3
1 Railing on border of roof 1200 mm high
1 Set of stringers for fixing of facing
1 Set of accessories for Multigon item 40
Consisting of:
2 Filter
Type bag filter
Filter area: 3 m²
Material: in touch with product stainless steel 1.4301
Cleaning: pneumatic
Incl. electronic control system for cleaning
Subcomponents according to manufacturers standards
Without filter ventilator
2 Min level indication
Rotating paddle principle
2 Max level indication
Rotating paddle principle
2 Continuous level-indication
Radar sensor
4 Rupture disk
For dust explosion pressure relief
No rupture detection
Incl. weather hood
2 Oszillomat S4S4QH
Swing beams 4
Discharge area 1,67 x 1,67 m
Material:
Stainless steel 1.4301 or similar in touch with product, other parts made of mild steel
Consisting of:
1 Discharge machine with stand, beams, drive components
1 Hydraulic cylinder with position measuring system
1 Hydraulic-system with oil reservoir, oil level indicator, motor, pump, valve, manometer, hoses, oil sump.
Design:
The beams and connecting rod joints are provided with high-performance pivoting bearings.
2 Hopper
For mounting under the Oszillomat
Inlet: 1,52 x 1,52 m
Outlet: Ø 0,45 m
Angle: 65 °
Material:
Stainless steel 1.4301 or similar in touch with product, other parts made of mild steel
Accessories:
1 Max level indication
Rotating paddle principle
Screw Conveyor
S 400 x 5000 mm
Material Stainless steel 1.4301 or similar in touch with product, other parts made of mild steel.
1 inflow element, dia 400 mm
2 outflow element with cleaning lid
1 drive advance 2,2 kW SEW, PTC thermistor sensor
This unit is driven by an attachable gear motor.
Compact control system for 2 Oszillomat
acc. to EN 60204-1 / EN 61439-1, for 2 Oszillomat
on DAP terms