Scanreco RC400 6 Pads + 2 JP joysticks with Walvoil DPX100 6 Sections radio remote control for construction equipment
≈ USD 7,306
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 663 39...
Show
+48 663 399 034
Poland
Poland
Poland
Poland
Poland, Choszczówka Stojecka
Greece, Polidendri
Poland, Warsaw
Poland, Police
Greece, Polidendri
Germany, Wiefelstede
The Scanreco RC 400 G2B remote control system has been especially developed for hydraulically driven mobile cranes and machinery. The system is a digital remote control system based on an extremely advanced microprocessor technology. Years of exhaustive and demanding testing have shown that the remote control system can cope with the roughest of environments.
The system is protected against electromagnetic and radio frequency radiation and can be installed onto all hydraulic valve types (voltage, current pulse width, or protocol steered) found on the market.
In its basic form the remote control system is comprised of a portable control unit with manoeuvre levers for proportional control and switches for ON/OFF functions, a central unit with connection cable for driving proportional electro-hydraulic slide controllers.
Digitally coded control information (lever deflection and switch position) is sent from the portable control unit via radio to the central unit. The portable control unit and central unit translate the magnitude and direction of the manoeuvre lever deflections and switch position.
It can be used for typical proportional functions, e.g.
-Slewing (rotation of crane)
-Main lift
-Jib
-Extension
-Grab open / close
-Rotator
Hydraulic, sectional valve Walvoil DPX 100 with compensation, full proportional.
Directional valve of the DPX series and the most versatile and complete. Highly configurable and versatile for applications such as Miniexcavators, Aerial platform, Truck Mounted Cranes, Telehandlers, Agricultural and Forestry machines.
- Valve model for high pressure applications (HP), inspheroidal graphite cast iron
- Optional spool position sensors
- Valve configurations with high flow sections (HF)
- Special inlet sections designed for steering applications
- Synergy with the Walvoil electronic systems range
- Inlet sections with or without by-pass valve
- Manual, hydraulic and proportional electro-hydraulic controls
Technical specifications of default configuration:
Inlet section: 32GPM 120l/min - Pmax 300 bar 4351psi Power supply port: 3/4" BPS, tank return port: 3/4" BPS
1st Slewing - Horizontal movement of the crane 40 L/min 10GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever
2nd Main lift 80 L/min 21GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever
3rd Jib - Horizontal bean extending from the crane 40 L/min 10GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever
4th Extension 60 L/min 16GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever
5th Grab open/close 20 L/min 5GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever
6th Rotator 20 L/min 5GPM A+B closed, electro-hydraulic control on both sides with AMP-JPT or Deutsch connectors with hand lever
Outlet section: with the possibility of combining valves, with bleed valve (LS relief), with pressure reducing valve. Control connection "V" and drainage connection "L" closed. Side connections "T1", "P1", "LS1" closed. DBV fixed and sealed to 175 bar at 90L/min.
Scanreco G2B Mini with 6 levers
- 1-6 linear levers
- Stop function according to EN ISO 13849-1 Cat. 3, PL e
- Various toggle switches, buttons and rotary switches
- Frequency bands: 433-434 or 902-928MHz (other frequencies available on request)
- Operating range > 100 m / > ~330 ft.
- Degree of protection: IP65
- Operating temperature: -20°C to +70°C / ~-4°F to +160°F
- Cable control: standard length 10 meters / ~33 ft.
- G2B Receiver PVG 32 Danfoss 12 or 24VDC Supply
- Choice of radio or cable control
- 8 bi-directional proportional outputs
- All analog outputs are programmable for final setting of speeds
- 14 digital outputs (where 1 is combined input/output) and 4 digital inputs (where 1 is combined input/output)
- A DV output to control the dump valve
- Radio communication in the ISM band using frequency hopping technology
- Manual mode available to bypass the radio system, providing only the DV output and allowing manual control via the hydraulic manifold (where available).
- Programmable logic with block, soak, decelerate, ramp functions and much more
- Please note that cable sets or connection plug sets are NOT included in the scope of delivery and must be ordered separately if required.
- Dimensions: (W x H x D): 350 x 160 x 190 mm / ~13.78 x 6.30 x 7.48 inches (without color display)
The kit works with a lot of application. For sure please contact with us.